Best Miter Saw Blades In 2022

All miter saw blades look alike, and it’s easy to assume they are. However, they are not. When cutting materials for use in DIY projects or job assignments, you have to consider various factors that are specific to the material, as well as the manner in which it is cut.

This article describes the best miter saw blades available in each category in order to help you achieve the results you want.

When Do I Need a New Miter Saw Blade?

No exact answer can be given due to the lack of information. Indicators do not indicate when to change miter saw blades. It is all a matter of experience and the manufacturers’ recommendations.

Reading the operating manual is the first step. This will tell you how often you need to change the blades. Cutting softwood will extend the blade’s life. It is more important to use a sharp blade if you are cutting sheet metal or hardwood. 

Finally, the saw blade should be of high quality. What is the material? Steel made from carbon dulls faster than steel made from cobalt or carbide. Fourth, the saw must be able to cut well. When you have trouble completing tasks promptly, it may be due to your dull saw blade.

Also, the number of times you use the saw will determine how much you pay. Every two weeks to a month should be enough to change the blade if you use it every day. Despite this, if you use your miter saw rarely, you could get a long life out of it.

Which Miter Saw Blade Should I Use?

You will get the best outcomes from your projects if you purchase the right miter saw blade. You can use this helpful guide to get started. 

A material for the blade

The materials used in miter saw blades vary depending on the project.

Carbon Steel

The cheapest miter saw blade is made of carbon steel. It specializes in soft and plastic materials. 

HSS (High-Speed Steel)

Carbon steel blades are less durable than high-speed steel blades. They are less apt to dull because they maintain their edge better and can operate at higher temperatures.

The Rockwell Hardness Scale scores these blades between 62 and 66, which indicates their ability to withstand higher temperatures. HSS blades are faster and can easily cut hardwood and MDF due to their increased speed.

A blade made from cobalt steel

An 8 percent cobalt content is characteristic of cobalt steel blades. As a result, they are rugged and can withstand even greater punishment than HSS blades. These blades, like the HSS versions, are hard-wearing and enduring, making them extremely durable.

Size of the Blade

The blade size is determined by the material being cut. A thin edge will be needed for sheet material for fine details. It will also make little difference in the depth of the blade, unless you are cutting multiple sheets at once.

I’m bored.

Consult your machine’s owner’s manual to determine the bore size. If the blade is to fit your device, the bore size is crucial.

This is the Diameter

This could result in a safety concern if the diameter is too large. A blade of a suitable width will also be described in the manual. A blade with a wider cutting edge will produce a wider cut.

Types of Saws

Every type and size of miter saw is available. A variety of miter saws are available, including single and double bevel types. In order to match the blades to the saws, there are various blade sizes from 8-inch to 12-inch.

Best Miter Saw Blades for 2022

Miter saw blades are a great way to cut wood, but there are many varieties to choose from. We reviewed dozens of miter saw blades to help you choose the right one for your miter saw and project.

IMAGEPRODUCTDETAILSCHECK PRICE
Makita A-93681 Mitersaw BladeMakita A-93681 Mitersaw BladeWeight: 5 Pounds
Size: 10 Inch
Number of Treeth : 80
RPM: 5870
Kerf: Ultra-Thin
Freud D12100X Saw Blade Freud D12100X Saw Blade Weight: 2.54 Pounds
Size: 12 Inch
Number of Treeth : 100
RPM: 6000
Kerf: Ultra-Thin
DEWALT (DW3106P5) Miter Saw BladesDEWALT (DW3106P5) Miter Saw BladesWeight: 3 Pounds
Size: 10 Inch
Number of Treeth : 32+ 60
RPM: 6000
Kerf: Thin
Freud (LU91R012) Sliding Miter Saw BladeFreud (LU91R012) Sliding Miter Saw BladeWeight: 2.42Pounds
Size: 12 Inch
Number of Treeth : 72
RPM: 6000
Kerf: Thin
Diablo Non-Ferrous Metal & Plastic Saw BladeDiablo Non-Ferrous Metal & Plastic Saw BladeWeight: 1.45Pounds
Size: 10 Inch
Number of Treeth : 80
RPM: 7000
Kerf: Thin

1. Makita A-93681 Mitersaw Blade – Best Table Saw Blade

Best Miter Saw Blades 2021
  • Weight: 5 Pounds
  • Size: 10 Inch
  • Number of Treeth : 80
  • RPM: 5870
  • Kerf: Ultra-Thin

With a blade of 10 inches, this Makita is slightly smaller than some other options. If you’re cutting thinner materials, this won’t be an issue, but if you’re cutting through thicker material, it will result in a decrease in depth. For a mirror finish, a 600 grit hone is used on the 80 carbide teeth.

You get fewer material waste and a smoother cut with the ultra-thin kerf. In addition, the teeth are hook teeth with a 5-degree angle, with a precision cutting option on the top and the sides. In addition, hook teeth are useful for cleaning sawdust and debris.

The blade will not gum up, so kickback is reduced. When you’re cutting, you have a better sightline as well. This blade has only one negative aspect: its cost. Bosch’s blades aren’t cheap, but there are more affordable packs available from other manufacturers. However, given the fact this saw cut through hardwood, softwood and plywood with ease, this blade is a good choice.

Pros
  • Blades with a titanium tip
  • A hook tooth
  • Extremely thin kerf
  • A perfect crosscut
Cons
  • Costly

2. Freud D12100X Saw Blade – Freud d12100x 100 Miter Saw Blade

Best Miter Saw Blades 2021
  • Weight: 2.54 Pounds
  • Size: 12 Inch
  • Number of Treeth : 100
  • RPM: 6000
  • Kerf: Ultra-Thin

When compared to the Makita, you can make deeper cuts with the Freud Diablo blade. A laser-cut kerf on this blade produces the cleanest cuts possible, and the blade has 100 teeth. Designed for use in fine woodworking, this blade enhances your level of accuracy and precision.

With carbide-tipped teeth, this blade resists heat and prevents dulling like the Makita. A laser-cut stabilizer vent on Freud keeps it from moving sideways and reduces vibration and noise. The result is a more accurate and controlled saw experience.

Perma-Shield non-stick coating ensures minimum resistance whilst cutting. As a result, your miter saw motor is less likely to be stressed.

Pros
  • It has a non-stick coating
  • 12 inch
  • 100 teeth
  • Teeth with carbide tips
  • A carbide tip on each tooth
Cons
  • This is the price
  • Suitable for woodworking

3. DEWALT (DW3106P5) Miter / Table Saw Blades

Best Miter Saw Blades 2021
  • Weight: 3 Pounds
  • Size: 10 Inch
  • Number of Treeth : 32+ 60
  • RPM: 6000
  • Kerf: Thin

It is a set of two DeWALT miter saw blades. In addition to the general-purpose saw blade with 32 teeth, there is one with 60 teeth for crosscutting. With carbide tips, these blades increase their heat resistance and durability. They are designed for 10-inch miter saws.

Compared to Freud and Makita blades, these are half the price and include two saw blades as well as the DeWALT brand name. Almost any cutting job can be handled with a saw blade with 32 teeth. Plywood, composites, plastic, metals, and composites can be cut with this machine.

Designed to reduce vibration, noise, and increase accuracy, these DeWALT blades reduce vibration and increase precision. With their thin kerfs, these blades are also great for sliding miter saws.

Pros
  • Excellent price
  • The two pieces come together as a set
  • All-rounder with a lot of potential
Cons
  • Problems with the material

4. Freud (LU91R012) Thin Sliding Compound Miter Saw Blade

Best Miter Saw Blades 2021
  • Weight: 2.42Pounds
  • Size: 12 Inch
  • Number of Treeth : 72
  • RPM: 6000
  • Kerf: Thin

Featuring 72 teeth and a 5-degree negative hook to improve cutting quality, the Freud blade makes cutting easier. Another particular design they use is the alternating top bevel (ATB), in which the teeth alternate between left and right. 

Workpieces are pushed down and toward the fence, giving you better control and accuracy. In addition to its enhanced performance on sliding miter saws, this blade also performs well on standard saws when performing crosscuts, rip cuts and bevels. 

You will be able to make detailed cuts on your sliding saw table because the kerf is thin and the teeth are carbide-tipped to increase durability. Furthermore, thin kerfs save the motor from excess strain. Similarly, this Freud blade is also coated in a non-stick surface called Perma-Shield, which increases blade lubrication as it passes through the stock.

Pros
  • It has a non-stick coating
  • It has a tooth design
  • Miter saws designed for sliding use
Cons
  • Costly
  • Building quality issues

5. Diablo Non-Ferrous Metal & Plastic Cutting Saw Blade

Best Miter Saw Blades 2021
  • Weight: 1.45Pounds
  • Size: 10 Inch
  • Number of Treeth : 80
  • RPM: 7000
  • Kerf: Thin

This is another Diablo blade. This one cuts plastics and nonferrous metals. Our choice is the best blade for PVC because of this reason. It has 80 carbide-tipped teeth and a diameter of 10 inches. 

They have a 5-degree angled triple chip grind, so they are burr-free and leave a clean surface. Also suitable for cutting laminate, aluminum and brass pipes. As such, it can serve a variety of purposes on-site. The thin kerf of the blade will guarantee a smooth cut and minimal strain on the motor of the miter saw.

Its Perma-Shield non-stick coating ensures this blade glides easily through the stock without gumming or kickbacks. As a result, the saw motor is less stressed.

A carbide tip on the teeth allows them to endure extreme heat during the cutting process and makes the blades last longer.

Pros
  • Coating that prevents sticking
  • 80 teeth
  • Grinding three chips at a time
  • Suitable for metal and plastic
  • Kerf thin
Cons
  • Affordably
  • Problems with quality of the build

Conclusion

Shops cannot function without a table saw blades or miter saw blades. Working with an automatic saw requires a lot of use of this blade. If you’re looking to separate a piece into two or create a precisely shaped cavity, using the right miter saw blade will help you achieve these goals faster and with less manual effort.

Choose from our selection of the best saw blades for miter saws. The buying guide above will also help you to make a better decision directly.